TeslaTesla Megapack post · 17 NovTESLA INTRODUCED THE 7.4 MW POWERCORE

Tesla Powercore: A 7.4 MW Solid-State Transformer Built in America

Tesla Energy introduced Powercore, a made-in-America medium-voltage unit that folds a transformer, inverter and breaker into one 7.4 MW box, and Elon Musk is cheering it on.

Illustration of a modular power unit glowing blue at a battery storage site at night
Powercore is Tesla's all-in-one solid-state transformer, inverter and breaker. Illustration: ENN.Illustration
AT A GLANCE
Tesla Megapack post · 17 Nov

Tesla's own posts show the specs and timing it claims; they cannot show real-world performance, pricing or customers, which have not been disclosed.

Product
Powercore: solid-state medium-voltage transformer, inverter and breaker in one unit
Rating
7.4 MW / 9 MVA continuous at 34.5 kV; 10 MVA peak with grid-forming
Peak efficiency
98.86%
Warranty
Up to 25 years
Markets
Battery storage, utility-scale solar, 800 Vdc data centers
STORY THREAD Tesla Powercore solid-state transformerFirst report in this thread. Updates will appear here.

Tesla Energy just named the missing piece of its grid lineup. On November 17, Tesla introduced Powercore, a solid-state medium-voltage transformer that also handles inverter and breaker duties in a single unit1. Tesla rates it at 7.4 MW (9 MVA) continuously at 34.5 kV, with grid-forming support up to 10 MVA of peak power, and says it is made in America and scheduled to start operating in 20271.

Elon Musk wasted no time cheering it on, and the main Tesla account amplified both his post and the product announcement23. For a company that has spent years building batteries for the grid, this is Tesla taking on one of the slowest, bulkiest parts of every energy project: the transformer.

What Tesla introduced

The announcement came through the Tesla Megapack account on X, which called Powercore a “solid state medium voltage transformer, inverter and breaker” that is “reliable, safe and secure,” rated at 7.4 MW/9 MVA continuously at 34.5 kVac with grid-forming support for 10 MVA of peak power1. The post closed with two short lines: “Made in America. Operating 2027”1. The main Tesla account reshared that announcement the same day3.

About an hour later, Tesla followed up with a much longer post laying out the full spec sheet, according to Electrek1. That sheet turned a teaser into a real product profile, covering efficiency, voltage ranges, warranty and operating temperatures.

What Elon Musk said

Musk framed the news in one line, which the official Tesla account reshared2:

Advanced solid state transformers at scale from Tesla

The words that stand out are “at scale.” Tesla is not presenting Powercore as a lab demo. The company says it will be built in the US “of U.S. and imported parts,” with first units operating in 20271.

The spec sheet, by the numbers

Here is what Tesla disclosed in its follow-up post, as reported by Electrek1:

SpecPowercore
Continuous powerUp to 9 MVA (7.4 MW) at 34.5 kV AC
Peak power10 MVA for grid-forming
AC range10 kV to 34.5 kV
DC range800 V to 2,000 V
Peak efficiency98.86%
AvailabilitySystem guarantees of 99.9% and up
WarrantyUp to 25 years
Operating range-40°C to 55°C

Powercore also packs a built-in solid-state medium-voltage breaker that Tesla says clears faults up to 1,000 times faster than a conventional breaker1. There is no flammable oil, and the design is modular, so components can be serviced in the field without swapping out the whole unit1.

Tesla is pitching one product for three markets: battery storage, utility-scale solar and 800 Vdc data centers1. For solar, Powercore works as a central inverter for today’s 1,500 Vdc arrays and for upcoming 2,000 Vdc systems1.

Tesla Megapack battery units at a storage site
Tesla's Megapack batteries are one of the three markets Powercore is built to serve.Illustration

Why a solid-state transformer matters

The idea is simple, and the payoff is big. A typical solar or battery project uses low-voltage inverters to turn DC into AC, then a large oil-filled, iron-core transformer to step that power up to grid voltage1. A solid-state unit does both jobs with silicon carbide power electronics, which means less equipment, a smaller footprint and active control over voltage and frequency1.

That active control is what “grid-forming” means: the unit can help hold the grid steady instead of just following it1. As more of the grid runs on batteries and solar, that ability becomes more valuable.

Timing helps too. Lead times on conventional transformers are stretching into years as data centers and renewable projects crowd into interconnection queues, which creates real demand for an alternative, Electrek notes1. A factory-built product with a 25-year warranty and no oil to manage is a direct answer to that bottleneck1.

How Powercore fits Megapack 3 and Megablock

Powercore completes a plan Tesla first described in September 2025, when it unveiled Megapack 3 and Megablock and said it would build its own transformers1. Megablock connects four Megapack 3 units to a transformer and switchgear, but at the time Tesla shared next to nothing about the transformer itself1. Powercore is that missing piece1.

When Megablock debuted, it was described as a pre-assembled medium-voltage platform delivering 20 MWh of AC storage, with Tesla saying the design cuts construction costs by up to 40% and installation time by 23%4. Each Megapack 3 unit offers 5 MWh of capacity, up from 3.9 MWh in Megapack 24.

Powercore pushes that efficiency further. Today’s Megablock setup is a two-step chain: Megapack’s inverters output 480 V AC, and a separate transformer then steps that up to medium voltage1. Powercore replaces that chain, and Tesla says the old architecture had twice the losses1. Fewer conversions, fewer boxes, less wasted energy: classic Tesla engineering applied to grid hardware.

Illustration contrasting a bulky traditional transformer with a compact modular power electronics unit
A solid-state unit replaces low-voltage inverters plus a large oil-filled transformer. Illustration: ENN.Illustration

The race with Heron Power

Powercore does not arrive in an empty field. Heron Power, the startup founded by Tesla’s former top engineer Drew Baglino, plans to start volume production of its own solid-state transformer, the Heron Link, in 2027, the same year Powercore is due to start operating1.

Baglino spent 18 years at Tesla, finishing as SVP of powertrain and energy, left in April 2024 and launched Heron Power in 20251. Heron hired engineers who led power electronics design for Powerwall 3, the next-generation Megapack and Superchargers, according to Electrek1. The startup has raised a $38 million Series A and a $140 million Series B led by Andreessen Horowitz and Breakthrough Energy Ventures, plus a $60 million credit facility from J.P. Morgan and TriplePoint Capital1.

Heron is building Heron Factory One, a 286,000-square-foot plant in Morgan Hill, California, designed to make 10,000 Heron Links a year, with commercial production planned for late 20271. Baglino says Heron has 50 GW of orders in the pipeline, and named customers include Vantage, Intersect, LG Energy Solution Vertech and RWE1.

On the specs each company has disclosed, Powercore looks strong. Electrek’s comparison lists Powercore at 7.4 MW / 9 MVA continuous versus about 5 MW for Heron Link in solar and storage and about 4.2 MW for data centers1. Powercore’s DC range runs from 800 V to 2,000 V, against 600 V to 800 V for Heron Link1. Peak efficiency is 98.86% for Powercore, compared with 98.6% DC-to-MV for Heron Link1. Both are grid-forming, and Tesla lists a warranty of up to 25 years where Heron has not disclosed one1.

Heron does have a head start on public customer commitments1. Tesla’s advantage is its installed base: Powercore slots straight into the Megapack and Megablock systems Tesla already sells.

What to watch next

Tesla still has not shared pricing, customers or a factory location for Powercore1. Those are the next big pieces of news. Keep an eye on:

  • First customers: who signs up for Powercore, especially among battery storage, solar and data center developers1.
  • The factory: where in the US Tesla builds it, given the “Made in America” promise1.
  • 2027 deployments: whether first units are operating on schedule, as Tesla’s announcement states1.
  • Data center adoption: how Powercore performs in 800 Vdc data center designs, one of its three target markets1.

For now, the message from Tesla and Musk is clear: the company that scaled batteries for the grid now wants to scale the power electronics that connect them, too23.

Questions readers ask

What is Tesla Powercore?

A solid-state medium-voltage unit from Tesla that combines a transformer, an inverter and a breaker. Tesla rates it at 7.4 MW (9 MVA) continuously at 34.5 kV.

When will Powercore be available?

Tesla says Powercore is made in America and will be operating in 2027. It has not shared pricing, customers or a factory location.

What is Powercore used for?

Tesla is pitching it for battery storage, utility-scale solar and 800 Vdc data centers. For Megablock it replaces a two-step setup that Tesla says had twice the losses.

What did Elon Musk say about Powercore?

Musk posted "Advanced solid state transformers at scale from Tesla," and the main Tesla account reshared it.

How does Powercore compare with Heron Power's Heron Link?

Based on disclosed figures reported by Electrek, Powercore has a higher continuous rating (7.4 MW versus about 5 MW for solar and storage) and a wider DC range. Heron also targets 2027 for volume production.

Sources

Each story is checked against the original material and independent reporting. Numbers in the text point here.

  1. 1
  2. 2
  3. 3
  4. 4