StarshipElon's post · 17 NovMUSK: PART TO BE SWAPPED FOR STAINLESS STEEL WOOL

Starship Flight 15: Stainless Steel Wool Headed for Future Starships

Elon Musk replied to a fan on X that 'that' will be replaced with stainless steel wool for future flights; Starship watchers read it as the ablative side layers.

Illustration of a stainless steel rocket beside a launch tower with a close-up of fine metal fibers
Illustration: Musk says stainless steel wool is coming on future Starship flights.Illustration
AT A GLANCE
Elon's post · 17 Nov

Musk's reply shows what he said will change on future flights, but it does not name the part, so which component he means rests on observers' readings.

What Musk wrote
"That will be replaced with stainless steel wool for future flights"
Date
November 17, 2026, as a reply to @xdNiBoR on X
Part named in the post
None; the reply says only "that"
Observers' reading
Joe Tegtmeyer and BASENOR: the ablative side layers
Fan's own reading
Robin (@xdNiBoR) unsure: ablative heat shield or chopstick pads
STORY THREAD Starship Flight 1514 updates so far

Since ENN’s last update on SpaceX’s onboard videos of Ship 42’s final approach to the catch, Elon Musk has added an engineering note that points beyond this flight. On November 17 he replied to a fan on X with one short sentence about future flights: something will be replaced with stainless steel wool.1 He did not say what. The Starship community has a strong reading of the answer, and ENN sets out below exactly what he wrote and what others make of it.

What Musk wrote

The post is a reply to the X account @xdNiBoR, and it reads in full:1

That will be replaced with stainless steel wool for future flights

That is the entire statement. The reply uses the word “that” and the phrase “future flights,” and nothing more: no part name, no flight number, no date.1 The post Musk was answering is not among the sources ENN could read, so ENN does not report what the original question was.

The reply arrived amid a run of celebratory Starship posts from Musk. On November 16 he shared “Catching a Starship from space” and “View of Starship landing from the tower,”23 and on November 17 he posted simply “Starship 42.”4 SpaceX itself posted “Views from Mechazilla of the first ever Starship catch” on November 16.5

Which part? The readings so far

The person Musk replied to is Robin (@xdNiBoR), whose profile lists software work at Socialdatabase and @starlink_stats.6 On November 14 Robin had pinned a post calling SpaceX’s first ever ship catch “INSANE.”6 After Musk’s reply, Robin posted that “Elon just revealed that SpaceX will use stainless steel wool,” then added: “I’m not totally sure if he means replacing the ablative heat shield or the chopstick pads.”6 So even the person on the other end of the exchange flagged two possible meanings.

Other Starship watchers read it one way. Space photographer Joe Tegtmeyer wrote that some people have asked how the ablative layers in the sides of the ships can survive the catches while providing protection and not being damaged, and that “@elonmusk has stated the ablative sheets will be replaced by a stainless steel wool material.”7 The BASENOR news desk, citing both Musk’s post and Tegtmeyer’s, reported that Starship’s current ablative side layers, which it describes as the black backup heat shield material lining the vehicle’s flanks, will be replaced with stainless steel wool on future flights.8

That is the leading interpretation, and it comes from these observers rather than from Musk’s own words. ENN will update if Musk or SpaceX names the part directly.

Starship hardware at SpaceX's Starbase site in Texas
Starbase, Texas, where SpaceX builds and catches Starships.Illustration

What the ablative layer does today

BASENOR describes Starship’s thermal protection as layered. The windward side carries hexagonal ceramic tiles, the primary heat shield. Beneath the tiles, on the sides, sits an ablative sublayer that BASENOR calls a black material, “likely pyron,” meant to act as a last line of defense if tiles are lost during reentry.8 Ablative material, by design, is consumed: BASENOR notes that once compromised it requires replacement, which works against the rapid reuse SpaceX is chasing.8

Tegtmeyer adds the catch angle. He wrote that the current ablative sheets and related felt materials are relatively soft and get mechanically scraped or abraded where the catch arms contact the vehicle.7 His post included an image he described as current ablative material damage on Ship 42, which he credited to @NASASpaceflight and @esherifftv.7 That observation is Tegtmeyer’s; Musk’s reply does not mention Ship 42 or the catch.1

How stainless steel wool insulates

Steel wool may sound like a kitchen item, but Tegtmeyer laid out a serious engineering case for it. He explained that it works the same way as other fibrous insulation such as ceramic fiber blankets and mineral wool: fine metal filaments trap gas in a large void volume, and the long, winding heat paths through the fibers keep thermal conductivity low.7 He wrote that densities in historical metal-wool concepts ran roughly 60 to 85 kg/m³, competitive with other high-performance insulations.7

There is real history behind the idea. Tegtmeyer pointed to a 1974 NASA study that evaluated metal-wool packaging for reusable heat shields on Shuttle-like vehicles.7 By his account, it concluded that metal wool is thermally competitive with the best insulations, has low weight, resists chemical attack, and is practical with 300-series stainless steel up to about 1250 K (about 977 °C or 1790 °F) under appropriate load and oxygen conditions.7

The sides are a sensible place for it. Tegtmeyer noted that the sides and leeward areas of Starship see significantly lower heating than the windward face, and that the stainless steel hull already tolerates high temperatures, with a melting point around 1400 °C.7 BASENOR adds that the hull alloy keeps high strength at cryogenic temperatures and can tolerate roughly 820 to 870 °C.8

Abstract close-up illustration of porous stainless steel wool fibers
Illustration: fine metal filaments trap gas in a large void volume, which is how metal wool insulates.Illustration

Why it fits the reuse mission

The big idea is durability. Because metal wool is non-ablative, Tegtmeyer wrote, it does not intentionally erode or char away, so it stays in place across multiple flights instead of needing full replacement after each reentry, in line with Starship’s rapid-reuse goals.7 BASENOR makes the same point: steel wool does not ablate away, so it should survive reentry cycles without being swapped between flights.8

It also suits a world where ships come home to the tower. Tegtmeyer listed the advantages against the catch arms: metal wool is inherently impact- and abrasion-resistant, it can compress and flex under the arms’ load without being sheared off, and it is the same material family as the ship’s structure, which makes thermal expansion and attachment straightforward.7 BASENOR sees a broader pattern of SpaceX iterating toward all-metal construction: a stainless steel structure with stainless steel wool insulation keeps the material stack more uniform, which simplifies inspection.8

In Tegtmeyer’s summary, the wool trades the “sacrificial” behavior of ablatives for a durable, porous metallic insulator that still limits heat reaching the structure while surviving the mechanical demands of a tower catch.7 For a program aiming to land a ship, inspect it and fly it again, that is exactly the kind of quiet engineering choice that adds up.

What is still open, and what to watch

Plenty is still unknown. Musk’s reply gives no flight number, implementation date or specs, and BASENOR notes that no official timeline has been published and that details on the wool’s density, weave and attachment method are still emerging.8 The part itself is not named in Musk’s post, and Robin’s own uncertainty between the ablative heat shield and the chopstick pads shows why that matters.16

Here is what ENN is watching next:

  • A direct word from Musk or SpaceX naming the component and which ship will carry it first.
  • New hardware at Starbase, where BASENOR expects the change could appear on vehicles already in fabrication, while stressing that is not confirmed.8
  • More catch footage, as SpaceX keeps sharing views of the first ever Starship catch from the ship and from Mechazilla.9510

For now the takeaway is simple and exciting: days after the first Starship catch, Musk is already talking about what changes on the ships that come next.15

Questions readers ask

What exactly did Elon Musk say?

On November 17, 2026, replying to @xdNiBoR on X, he wrote: "That will be replaced with stainless steel wool for future flights."

Which Starship part is being replaced?

Musk's reply does not name it. Joe Tegtmeyer and BASENOR read it as the ablative layers on the ship's sides. Robin (@xdNiBoR), the user Musk replied to, said he was not sure whether Musk meant the ablative heat shield or the chopstick pads.

Why use stainless steel wool?

According to Tegtmeyer, metal wool insulates by trapping gas between fine filaments, does not burn away so it can stay on across flights, and is tougher than soft ablative layers when the tower's catch arms touch the ship.

When will the change fly?

No flight number or date has been given. BASENOR notes no official timeline has been published.

Sources

Each story is checked against the original material and independent reporting. Numbers in the text point here.

  1. 1
    PrimaryMusk reply on stainless steel wool for future flights X (@elonmusk) · Nov 17, 2026
  2. 2
    PrimaryCatching a Starship from space X (@elonmusk) · Nov 16, 2026
  3. 3
    PrimaryView of Starship landing from the tower X (@elonmusk) · Nov 16, 2026
  4. 4
    PrimaryStarship 42 X (@elonmusk) · Nov 17, 2026
  5. 5
  6. 6
    ReferenceRobin (@xdNiBoR) profile and posts X (@xdNiBoR) · Nov 17, 2026
  7. 7
    CoverageJoe Tegtmeyer on stainless steel wool and its NASA history X (@JoeTegtmeyer) · Nov 17, 2026
  8. 8
  9. 9
  10. 10
    CompanyStarship 42 coming in for catch X (@SpaceX) · Nov 16, 2026